How to Set Up and Maintain Your Echelon Cold Plunge Tub

Quick Answer

Setting up your Echelon All-In-One Hot or Cold Plunge Tub is straightforward but requires careful attention to placement and water chemistry. Follow the steps below for a safe installation and a simple maintenance routine that keeps the water clean and the system running efficiently.

Setup and Maintenance Steps

1. Choose a Level, Sturdy Location: Place the tub on a flat, solid surface that can handle the weight of water (over 1,000 lbs when full). Avoid soft ground or decks without reinforcement. For outdoor use, ensure the area is shaded to reduce algae growth. Checkpoint: Use a carpenter’s level to confirm the surface is even. An uneven tub can strain the pump and jets.
2. Unpack and Inspect the Tub: Remove all packaging and inspect the shell, jets, and control panel for shipping damage. Confirm the power cord is intact and the drain plug is secure. Keep the packaging in case you need to return the unit. Common mistake: Skipping the inspection. A small crack can lead to leaks later. Run your hand along the interior to feel for any rough spots.
3. Connect Power and Fill with Water: Plug the tub into a dedicated GFCI outlet. Do not use an extension cord. Fill the tub using a garden hose until water covers the jets (about 80% full). Leave room for water displacement when you enter. Checkpoint: Turn on the pump briefly to check for leaks before filling completely. If you see water escaping, tighten connections.
4. Set Temperature via the App or Control Panel: Use the Echelon Fit app or the on-unit panel to set your desired temperature. For cold plunge, aim for 50–59°F; for warm recovery, 95–104°F. The unit will cool or heat gradually—allow up to 24 hours for first-time temperature stabilization. Common mistake: Expecting instant cold. The system needs time to bring the water to temperature, especially if starting from warm tap water.
5. Establish a Water Care Routine: Test pH and sanitizer levels weekly using a spa test kit. Maintain pH between 7.2 and 7.8. Add a small amount of bromine or chlorine after each use to prevent bacterial growth. Change the water every 4–6 weeks, or more often if used daily. Checkpoint: Cloudy water means your chemistry is off. Shock the water with a non-chlorine oxidizer and re-test before the next plunge.
6. Clean Jets and Filter Regularly: Wipe down the chrome jets and interior shell with a soft cloth and mild cleaner monthly. Rinse or replace the filter cartridge every 30 days to keep water flow strong. The 4 chrome jets can accumulate mineral deposits if you have hard water. Common mistake: Using harsh chemicals or abrasive pads. They can scratch the acrylic surface and damage the jets. Stick to spa-safe cleaners.

Key Product Features

• Echelon All-In-One Hot or Cold Plunge Tub: Faster. Colder. Cleaner. Smarter. Introducing the Echelon All-In-One, a premium hard tub system designed for any space, indoors or out. With 4 chrome jets and 7 LED color options, you can create the perfect atmosphere for recovery or relaxation. Easily control heating and cooling through the app or directly on the unit, with temperatures ranging from 37–104°F. This system gives you precise control over water temperature for targeted cold therapy or warm recovery. The app control means you can preset your plunge temperature before you even step outside, saving time and ensuring consistency.