When Your EX5 or EX5s Needs a New Encoder Wheel
The encoder wheel is a small but critical component inside your Echelon EX5 or EX5s bike. It tracks pedal cadence and communicates that data to the console. If you notice erratic speed readings, sudden drops in cadence, or a console that stops responding to pedaling input, the encoder wheel may be worn or damaged.
Replacing it with the correct part restores accurate performance. This guide covers the genuine replacement part, what to check before you order, and what the installation process involves.
The Genuine Replacement Part: AT1099
- EX5/5s series Encoder Wheel | AT1099: The EX5/5s series Encoder Wheel AT1099 is a genuine merchandise component designed for compatibility with Echelon Fit EX5 and EX5s models. Using a non-genuine or incorrect encoder wheel can cause compatibility issues or inaccurate cadence data. This part is specifically designed for your EX5 or EX5s.

EX5/5s series Encoder Wheel | AT1099 - EX5/5s series Encoder Wheel | AT1099: Part number AT1099 for precise identification. When ordering, confirm that the part number matches AT1099. This ensures you receive the correct component for your bike model.
- EX5/5s series Encoder Wheel | AT1099: This replacement part ensures accurate performance for your equipment. A worn encoder wheel can cause erratic cadence readings. Replacing it with the genuine AT1099 restores consistent data transmission to the console.
What to Check Before You Order
Before purchasing the AT1099 encoder wheel, verify a few things to avoid ordering the wrong part.
- Confirm your bike model: The AT1099 is compatible with Echelon Fit EX5 and EX5s models only. Check the model number on your bike frame or in the Echelon Fit app settings.
- Inspect the existing encoder wheel: If possible, remove the bike's side cover and visually inspect the encoder wheel. Look for cracks, broken teeth, or excessive wear. Compare it to the AT1099 to confirm it's the same shape and size.
- Check part number: The AT1099 encoder wheel is identified by part number AT1099. If your current wheel has a different part number, it may not be the same component.
Replacing the Encoder Wheel: What to Expect
The supplied catalog does not include step-by-step installation instructions, but based on typical encoder wheel replacement on Echelon bikes, here is a general outline. Always proceed carefully and consult a professional if you are unsure.
- Gather tools: You will likely need a Phillips head screwdriver, a small flathead screwdriver, and possibly a socket set to remove the bike's side cover.
- Disconnect power: Unplug the bike from the wall outlet before starting any disassembly.
- Remove the side cover: Unscrew the bolts securing the side cover (usually on the non-drive side). Carefully lift the cover off.
- Locate and remove the old encoder wheel: The encoder wheel is typically mounted on the crank arm or a shaft near the bottom bracket. Note how it is oriented before removing it.
- Install the new AT1099 encoder wheel: Align the new encoder wheel in the same orientation as the old one. Secure it with the same screws or fasteners.
- Reassemble and test: Replace the side cover, plug in the bike, and pedal to verify that cadence readings are stable and accurate.
What the Catalog Does and Does Not Tell You
The supplied catalog confirms that the AT1099 encoder wheel is a genuine Echelon Fit component, compatible with EX5 and EX5s models, and that it ensures accurate performance. It also lists the part number AT1099 for identification and notes that it is a standard single unit configuration.
The catalog does not include installation instructions, torque specifications, or details about the encoder wheel's internal mechanism (such as the number of slots or optical sensor type). If you are not comfortable with disassembling your bike, consider having a professional technician perform the replacement.

